Fog and Reverse Lights

I managed to get around to mounting the reverse and fog lights onto the nudge bar. I'll improve this following IVA but I don't want big square holes in the body.

This was an easy job, just take 4 1" rubber lined P-clips and some 5mm aluminium flat bar. Bend the bar and use the pre-drilled holes to mount the lights.

The lights use 5mm hex bolts with nylocs and the P-clips 6mm with nylocs.

A little conduit to protect the wires going underneath the bodywork and all done. To say how ugly these lights are I can live with how this looks for now.

Weirdly in the photo to the right it looks like the lights are in the body - how strange!