"Buy cheap, Buy Twice"
I had bought a cheap bearing for the lower bracket and then spent money on a custom made aluminium spacer. This cost around £40 but it was too big.
AK make a lower bracket with a nylon bush and stainless bracket. At £65 it is far too expensive but it fits easily so I went with it.
Fitting is simply a case of drilling two 6mm holes and bolting through with M6 and nylocs. I have now attached the column extension to the BMW rack (with M8 and spring washers) and its now ready for the main column to be fitted as soon as I am finished with the dash wiring.
No comments:
Post a Comment